WIX Archives
Re: Need T.O. for voltage change
Posted by Stoney on Wed Dec 03, 2003 09:40:38 AM
In reply top Re: Need T.O. for voltage change posted by jcw on Tue Dec 02, 2003 10:51:30 AM
Thanks, I'll pass that on.
: : stoney
: if the acft is a flyer right now he has a job infron o
: f him. if it's a project then it's not so bad. all he sh
: ould have to do is get the manual for the SNJ5 and pull th
: e appropriate part numbers for the electrical parts and pu
: t them in. the wiring is no good and should be chected as
: the amperage changes (ie the wire gage pe distance run) be
: tween the two. when i did mine it was'nt a factor as i tor
: e what wiring remained out and tossed it away then designe
: d a new modern 12 volt system with the alt and got it appr
: oved and then built it up myself. drew up the new cad elec
: trical system and submitted it with the 337. works fine a
: nd any electrition can read the drawings and work on it..h
: e can go the other way if he wants (ie 12 to 24)but the co
: st is going to add up when considering all the componants
: that will have to be changed...starter, gen, voltage reg o
: r gen controle pnl, all the lights big and small, the horn
: , both relays, battery try, radios and intercomm if they a
: re the original or old style. why change when you can jump
: from most cars in a pinch????