WIX Archives
Re: cnd registration size
Posted by Roger Cain on Fri Sep 13, 2002 11:24:07 PM
In reply top cnd registration size posted by FredW on Fri Sep 13, 2002 10:16:32 PM
This info is copied directly from the Canadian Transport Page. More info can be found at: or try the link below............Roger
Mark Size and Location Requirements
Generally, there are marks on the side of the aeroplane or helicopter, and marks on the bottom surface of the wings (aeroplane), fuselage or cabin (helicopter). In Canada, though, marks on the bottom surface are optional.
If the owner has marks both on the side AND on the bottom surface of the wings or fuselage (or cabin for helicopter), the following applies:
- the marks on the side must be at least 15 cm (5.9 inches); and
- the marks on the bottom surface must be at least 50 cm (19.68 inches).
If an owner decides not to display marks under the wings of the aeroplane or the bottom surface of the fuselage (or cabin in the case of a helicopter):
- then the marks on the side must be larger, i.e. they must be at least 30 cm (11.8 inches) except where the dimensions of the structure do not permit this. In that case the marks shall be as high as possible but never less than 15 cm (5.9) inches.